SlurryKat Trailing Shoe Injectors

SlurryKat's unique design of trailing shoe was designed with our extensive knowledge of slurry spreading in our contracts division over the past decade. The trailing shoe is designed mainly for use on grassland and arable land for applying slurry to the soil surface with minimum contamination to hte plant leaves.

It is made up of a single beam frame carrying steering shoe elements which are fixed at 250mm spacings. Each element has a steering of -15/+15°, which allows constant application of the slurry while turning around curves. The elements are fitted with a self sharpening share which parts the plant leaves allowing slurry to be delivered to the soil surface via a rubber injection cone, which is positioned directly behind the share. This achieves a uniform line of slurry on the soil surface, which reduces nitrogen losses by up to 80% compared with the conventional splash plate method. Odour from the slurry is also significantly reduced, with the reduction in contamination of the plant leaves, the trailing shoe system can be incorporated into the rotational grazing system, whereby slurry can be applied after each grazing without affecting future grazing performance.

Macerator/Distributor

Vogelsang Exacut
50mm Outlets
Hydaulic drive
Self sharpening knife system
high efficiency stone/debris trap

Applications

The slurryKat trailing shoe can be used as part of an umbilical system or tanker mounted.
In both applications it has been proven to be highly efficient and ergonomic in all conditions.
The SlurryKat shoe can also be fitted with a splash plate for flexibil;ity of use.

Flowmeter Monitoring

As with all SlurryKat spreading equipment a flowmeter system can be incorporated, this means that precise application rates can be achieved and monitored and best use of the slurry can be accurately achieved.

There are currently no products in this category, please select another category from the left menu.